Forums IMPORTANT: PLEASE READ Diamond Dowsing tolerance rods

Hallo all,

My name is Paul Kroone from the netherland.

Im in my 2th week with diamond dowsing,my 3th dowsing course, and was out of rods the 2th day, so i ordered welding wire to make my own so as was told in the pg 13 of the manual.

I measured the rods i was given by the course and noticed that the rods are a bit smaller then the 18 inch the manual was saying.


So my question what is the tolerace of the rods +/- 2 milimeter?

2th question the paint i cannot get 100% the same colors over here but spraycans that are more or less the same, is that okay?

I still can block the stress so i think it is okay.


3th question± i found some negative vortexs in middle of livingroom, so what are creative ideaas to hide the 2 rods in the middle of the floor?


sincerely,

Paul Kroone

thx for you reply Alan,

I had the problem fixed by sending the misses shopping for a low new talble for the living room.

Keep on dowsing,

Paul K

Hi Paul,

I can confirm that the a couple of millimeters less or more will not affect the rods, neither the colour. However the intention whilst doing the rods and when curing the stress lines is of uttermost importance. Placing the rods in a cubit ring will also help to make them more powerful.

Regards,

Pierre

Hi Pierre,

i noticed that indeed getting the right intension setting for the rods is the key ingredient.

What i do now is make 20 rods at 18 inch length , then clear them with the violet flames around en through them, then spray them with the color of the cure, then i do my diamond dowsing meditiatiotn with the cd, then i set de intention for the cure.

My latest adition is giving the rod the blessing for healing and harmonie, this also makes the rods more powerfull.
Got this insperation from the blessing of the water and thea story .

So i will take your advice and now im gonna place this fresh made rods in a engergy ring with the intention to create the highest possibele cure rods that is possible .I gues 24 hours should be time enoufgh to get the engergy in.


I will let you know what's gonna happen.

Regards,

Paul kroone

I only leave them in the ring for a minute but I will try to leave them longer to see what happens.
Thanks for your feedback Paul.

Regards,

Pierre