Previous Thread
Next Thread
Print Thread
Page 1 of 2 1 2
Joined: Apr 2008
Posts: 3
Junior Member
OP Offline
Junior Member

Joined: Apr 2008
Posts: 3
Could you please tell me if it would be OK to place the energy ring between mattress and springs.

Regarding the rods. The manual says we can create our own. Our local hardware store has the copper coated steel, but it is 4/32, not 3/32. Does this make a difference.

I'm really having fun with the dowsing. Thank you folks for making it available.

Terry

Joined: Apr 2008
Posts: 3
Junior Member
OP Offline
Junior Member

Joined: Apr 2008
Posts: 3
I spoke to Annette regarding some other things just after posting this question and she told me that yes, you can place the rings between the mattress and the springs and the 4/32 rods are fine.

Terry

Joined: May 2008
Posts: 7
Junior Member
Offline
Junior Member

Joined: May 2008
Posts: 7
I found a place online that has the rods in 3/32"w X 36" lengths. The more pounds you purchase, the cheaper by the pound they are. 70 full rods is 5 lbs, which will make 140 cures. If anyone is interested, I'll post the site link. The shipping wasn't that bad, the rods were $1.50/lb, and they shipped fast. UPS wasn't nice to the box, but they usually aren't anyway lol. \:\)

Joined: May 2008
Posts: 7
Junior Member
Offline
Junior Member

Joined: May 2008
Posts: 7
Yes please post the website

Joined: Sep 2007
Posts: 57
Member
Offline
Member

Joined: Sep 2007
Posts: 57
Which size energy ring should you place?

Joined: May 2008
Posts: 7
Junior Member
Offline
Junior Member

Joined: May 2008
Posts: 7
Sorry about the delay, as I don't check this forum often. The website for welding rods: https://weldingsupply.securesites.com/cgi-bin/einstein.pl?Next::1:UNDEF:OR:terms::PF

The ones I purchased were "house brand" and the number is
RG45322. This is the page where they are listed to order from, so you won't have to search \:\)

Hope this helps.

Joined: Oct 2001
Posts: 3,195
Likes: 4
Learning Strategies
Member
Offline
Learning Strategies
Member

Joined: Oct 2001
Posts: 3,195
Likes: 4
Aloha All,

I just noticed where this thread went and thought I'd chime in, as I was looking into purchasing bulk wire/rods, as mentioned in the book. Before doing so I thought I'd get Marie's thoughts one it - copper rods are copper rods right?

Her comment was that if I were to make them myself, they will not have the same impact, as the ones included in the course are special activated and alchemical treated in such a way that every one will have fabulous results.

So there you go. Go bulk if your choose to, I'm going to order a filler set.

Much Love, Shawn

Joined: Aug 2008
Posts: 3
Junior Member
Offline
Junior Member

Joined: Aug 2008
Posts: 3
Hi,
Just bought the course, am going thru it first. Appreciate the help.

Questions: About the energy rings Are they the same as the ones we can purchase with Learning Strategies?

These are quite expensive though, can we make them ourselves? And would the results be the same?

thanks
tuvi

Joined: Oct 2001
Posts: 3,195
Likes: 4
Learning Strategies
Member
Offline
Learning Strategies
Member

Joined: Oct 2001
Posts: 3,195
Likes: 4
Aloha tuvi,

The rings we purchase are very specifically designed, measured, crafted and for working with these energies. I'm sure the accounting department was pretty eyebrow-raised about the cost of the rings for inventory, but got it once they were informed of the process of their creation and the resulting effects.

Much Love, Shawn

Joined: Aug 2008
Posts: 3
Junior Member
Offline
Junior Member

Joined: Aug 2008
Posts: 3
Hello everyone,

I'm new to the forums and this is my first post. I have just purchased Diamond Dowsing and I'm really enjoying the course so far. I received the Diamond Feng Shui course as a gift and I've been learning that as well. It's been quite an adventure, I must say.

I'd just like to chime in about making your own rods and rings.

This phrase comes to mind - "Change the way you look at things and the things you look at will change."

I know that these rods and rings are specifically designed and imbued with energies and intentions. I have not done Inner Diamond work but as an energy worker and practitioner who's done quite a bit of intention, healing and transformational work with others and myself, I've been really experiencing that everything - you, me, the computer, monitor, the rods and rings, are made up of the subatomic particles, photons and all sorts of quantum physical information. I noticed that when I work with clients and come from a place of amusement and that they're "just energy" and intend whatever it is they want to shift, their particles and photons in the form of their bodies respond and shift into the intended reality.

As taught in the film, The Secret, we're all energy. What I've been experiencing and getting over and over is that when I come from that space - that we're all energy, I make up what it is I want and/or want to transform and shift and allow it to happen... things happen. Intention. trust in your intention, and giving yourself permission and allowing it to happen are key. Yes, you are making it up, and how would it be if you trust in the power of that?

Yes, that was a little tangent, so I'm bringing it back to the rods and rings. What I'm suggesting is that what if I had a set of the original rods and rings and I got the bulk materials and with one hand on the original and one on my new set, I duplicate the energetic imprint through intention and trust. Know, believe and trust that my new set then carries the properties of the Marie Diamond infused set.

What do you all think?

I haven't done this yet but I just want to open the dialogue and create this as a possibility for an alternative to purchasing the extra rods and rings. I see how the power of intention absolutely creates amazing transformational shifts with other humans, so why not with copper rods and rings? It's all energy anyway. And of course, you can always muscle test for effectiveness.

I deeply appreciate all the work and craftsmanship that Marie Diamond and the Learning Strategies staff and team have put into these awesome courses and these tools.

I'm writing this post not to dishonor the Diamond process and tools or to dissuade anyone from getting the rings and supplemental rods, but to offer an opening that we are all powerful energetic beings who have the power to shift and transform anything through permission, intention and trust. Those of you who practice Spring Forest Qigong, I'm sure you know this. All this work and all the products Learning Strategies provide helps you to not only experience and realize your true greatness, but also fully own it and trust it.

So to provide an alternative response to Tuvi's question:

"These are quite expensive though, can we make them ourselves? And would the results be the same?"

My response is - Why not? And, what would it be like if the results were the same? (And, really allow yourself to go into that space of what that would be like).

And... have fun! :-)

With much gratitude and peace,
Pete

Page 1 of 2 1 2

Moderated by  Shawn_Grim 

Link Copied to Clipboard
©, Learning Strategies Corporation, All Rights Reserved
Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 5.6.40 Page Time: 0.084s Queries: 35 (0.026s) Memory: 3.2376 MB (Peak: 3.5970 MB) Data Comp: Off Server Time: 2024-03-28 10:03:05 UTC
Valid HTML 5 and Valid CSS